A field screening test for the assessment of concentrations and mobility of potentially toxic elements in soils: a case study on urban soils from Rome and Novi Sad

The increasing demand for environmental pollution control results in the development and use of new procedures for the determination of dangerous chemicals. Simple screening methods, which can be used directly in the field for a preliminary assessment of soil contamination, seem to be extremely advantageous. In our laboratory, we developed and optimized a rapid test for a preliminary evaluation of both the concentration and the mobility of some potentially toxic metals in soils. This screening test consists of a single extraction of the soil sample with a buffer solution, followed by the titration of the extracted solution with dithizone to determine the contents of bi-valent heavy metals (such as Pb, Cu, Zn, and Cd). This screening method was then directly applied in the field during the sampling campaign in the framework of an Italian–Serbian collaborative project, finalized in the study of metal availability in soils. The results obtained in the field with the rapid test were compared with those obtained in the laboratory following the conventional procedure commonly used to evaluate metal bioavailability (diethylenetriaminepentaacetic extraction). Moreover, selected samples were analyzed sequentially in the laboratory using the standardized BCR three-step sequential extraction procedure. The screening test gave results conceptually in good agreement with those obtained via the BCR procedure. These preliminary data show that the proposed screening test is a reliable method for the preliminary rapid evaluation of metal total concentrations and of potential metal mobility in soils, supporting sampling activities directly in the field.     

Source characterization of fine and coarse particles at the East Mediterranean coast

Fine and coarse atmospheric particles were collected in Ashdod—a midsize industrial city on the southeastern Mediterranean coast, and in Gedera—a rural site, to characterize ambient particles and to determine their long-range transport during two major seasons—winter and summer. Manual PM2.5 and PM10 samplers, dichotomous samplers, continuous automated PM10 samplers, and denuders were used to sample particulate and gaseous pollutants.Fine and coarse concentrations in Ashdod were 21.2 and 39.6 μg m⁻³, and 23.9 and 30.5 μg m⁻³ in the fall–winter and summer campaigns, respectively. Crustal material, as calcites or dolomites mixed with silicates, dominated the coarse fraction and also the fine fraction on dusty days. In the fall–winter, S, P, and Ni were coupled with minerals. Coarse Ni was associated with crustal material during dust storms, while P originated from shipping and deposition of phosphates in the urban area around.Sulfates dominated the fine fractions in the summer season averaging 12 μg m⁻³. Multivariate analysis indicated that S was associated with As and Se, V and Ni, both associated with heavy fuel combustion, and Zn and Pb. In winter, those mixed sources were local, but in summer they were part of long-range transport. In the fall–winter, Zn and Pb were strongly associated with Mn, Ga, and Cu—elements emitted from either traffic or metal processing plants.Although the influence of crustal material on both size fractions was significant, most heavy metals were associated with PM2.5. Higher concentrations were linked to a larger number of particles in this fraction, to a larger surface area available for biochemical reaction [Harrison, R., Shi, J., Xi, S., Khan, A., Mark, D., Kinnersley, R., Yin, J., Philos, T., 2000. Measurement of number, mass and size distribution of particles in the atmosphere. Philosophical Transactions of the Royal Society 358, 2567–2579], and finally to a larger concern in regards to health effects.     

Using optical remote sensing techniques to track the development of ozone-induced stress

In this paper, a literature review about optical remote sensing (RS) of O₃ stress is presented. Studies on O₃-induced effects on vegetation reflectance have been conducted since late ‘70s based on the analysis of optical RS data. Literature review reveals that traditional RS techniques were able to detect changes in leaf and canopy reflectance related to O₃-induced stress when visible symptoms already occurred. Only recently, advanced RS techniques using hyperspectral sensors, demonstrated the feasibility of detecting the stress in its early phase by monitoring excess energy dissipation pathways such as chlorophyll fluorescence and non-photochemical quenching (NPQ). Steady-state fluorescence (Fs), measured by exploiting the Fraunhofer line depth principle and NPQ related xanthophyll-cycle, estimated through the photochemical reflectance index (PRI) responded to O₃ fumigation before visible symptoms occurred. This opens up new possibilities for the early detection of vegetation O₃ stress by means of hyperspectral RS.     

Arbuscular mycorrhizal fungi differentially affect the response to high zinc concentrations of two registered poplar clones

The effects of a high concentration of zinc on two registered clones of poplar (Populus alba Villafranca and Populus nigra Jean Pourtet), inoculated or not with two arbuscular mycorrhizal fungi (Glomus mosseae or Glomus intraradices) before transplanting them into polluted soil, were investigated, with special regard to the extent of root colonization by the fungi, plant growth, metal accumulation in the different plant organs, and leaf polyamine concentration. Zinc accumulation was lower in Jean Pourtet than in Villafranca poplars, and it was mainly translocated to the leaves; the metal inhibited mycorrhizal colonization, compromised plant growth, and, in Villafranca, altered the putrescine profile in the leaves. Most of these effects were reversed or reduced in plants pre-inoculated with G. mosseae. Results indicate that poplars are suitable for phytoremediation purposes, confirming that mycorrhizal fungi can be useful for phytoremediation, and underscore the importance of appropriate combinations of plant genotypes and fungal symbionts.     

Enhancement of source traceability of atmospheric PM by elemental chemical fractionation

During a 1-year study (“Fine dust” Project) funded by the Lazio regional government (Italy), about 1000 daily PM₁₀ and PM_2.5 samples collected from six sites in the region were subjected to chemical fractionation based on differences in elemental solubility. In this way, it was possible to achieve meaningful characterization of the elemental composition of individual samples. For most of the investigated elements, we found significant differences between the extracted and the mineralized residual fraction. In general, fine particulate was best characterized by the composition of the extracted fraction, while coarse particles from traffic-related sources were best characterized using residues. For several metals (Cd, Pb, Sn, Sb and V) having a critical environmental impact, this result was particularly clear.The application of Principal Component Analysis (PCA) and receptor modelling (PCR) to the data set allowed us to evidence the enhancement of selectivity towards different emission sources that is obtained when chemical fractionated data are considered instead of total element content. Chemical fractionation seems to generate very selective markers for specific emission sources and in particular for re-suspended road dusts, one of the main factors responsible for the increase of elemental concentrations in urban areas.     

Poliovirus and Other Enteroviruses from Environmental Surveillance in Italy, 2009–2015

Within the initiatives for poliomyelitis eradication by WHO, Italy activated an environmental surveillance (ES) in 2005. ES complements clinical Acute Flaccid Paralysis (AFP) surveillance for possible polio cases, detects poliovirus circulation in environmental sewage, and is used to monitor transmission in communities. In addition to polioviruses, the analyses comprised: (i) the monitoring of the presence of non-polio enteroviruses in sewage samples and (ii) the temporal and geographical distribution of the detected viruses. From 2009 to 2015, 2880 sewage samples were collected from eight cities participating in the surveillance. Overall, 1479 samples resulted positive for enteroviruses. No wild-type polioviruses were found, although four Sabin-like polioviruses were detected. The low degree of mutation found in the genomes of these four isolates suggests that these viruses have had a limited circulation in the population. All non-polio enteroviruses belonged to species B and the most frequent serotype was CV-B5, followed by CV-B4, E-11, E-6, E-7, CV-B3, and CV-B2. Variations in the frequency of different serotypes were also observed in different seasons and/or Italian areas. Environmental surveillance in Italy, as part of the ‘WHO global polio eradication program’, is a powerful tool to augment the polio surveillance and to investigate the silent circulation or the re-emergence of enteroviruses in the population.     

Linking atmospheric circulation to daily precipitation patterns over the territory of Bulgaria

An eight states non-homogeneous hidden Markov model is developed for linking daily precipitation amounts data at a network of 32 stations broadly covering the territory of Bulgaria to large-scale atmospheric patterns. At each site a 40-year record 1960?C2000 of daily October?CMarch precipitation amounts is modeled. The atmospheric data consists of daily sea-level pressure, geopotential height at 500 and 850?hPa, air temperature at 850?hPa and relative humidity at 700 and 850?hPa on a 2.5?×?2.5 grid based on NCEP-NCAR reanalysis data set covering the Europe-Atlantic sector 30W?C60E, 20N?C70N for the same period. The first 30?years data are used for model fitting purposes while the remaining 10?years are used for model evaluation. Detailed model validation is carried out on various aspects. The proposed model reproduces well the rainfall statistics for the observed and reserved data whereas the identified states are found to be physically interpretable in terms of regional climatology.